The Billet-Power™ Front Steer Rack and Pinion is made from all new components, including a new valve and piston. Our Power Rack offers over 6-inches of travel, which provides the maximum turning radius for classic and street rod applications. Each Flaming River Power Rack is proudly made in the USA, and is fluid and pressure tested and certified before leaving our facility.
48.5" OAL measured from tip to tip of the inner tie rod ends
All new components – Including valve, piston, seals, bearings and bushings, and pinion and rack gears
More than 6 inches of travel for full turning radius
Lighter – Approximately 12 lbs. lighter than OE
Stronger – 1 inch diameter Rack Shaft
Sleek, attractive blue powdercoated design
Longer cylinder and overlapping tube design for rack stability
Lifetime Serviceability
Test Certification included with each unit
Note: FR1789P "FR Power" universal joint is required for installation.
